地下城脚本用什么写的ping

发布时间:2019-11-01 来源:脚本之家 点击:

GetOwner.VBS用法,在命令行下:GetOwner.vbs 目录名会在相应目录下生成一个TXT.TXT文件,内里列出该目录下所有文件和文件夹的类型,大小,和所有者
注意:大小以MB为单位,小于1MB的就显示为0MB,

以下是代码:

G=WScript.arguments(0)
Set oFSO=CreateObject("Scripting.FileSystemObject")
set txt=oFSO.CreateTextFile(G&"TXT.txt",true) '嘿嘿,如果这个目录下刚好有一个TXT.txt文件,那就算你倒霉,
不会有人真用这种名字来做文件名吧?真的啊,真的有啊?那你
换地方吧~~~C: \TXT.TXT应该不会有了吧?
set objWMI=GetObject("winmgmts:")
Set oFiles=objWMI.ExecQuery("ASSOCIATORS OF {Win32_Directory.Name='"&G&"'}" & "where ResultClass=
CIM_logicalfile")
For Each oFile In oFiles
txt.WriteLine( "--------------------------------------------------------------")
txt.WriteLine( oFile.name)
txt.WriteLine( "Type: " & oFile.FileType)
if oFile.name=G&"system volume information" then
exit for
end if
if oFile.FileType="File Folder" then
Set objFolder=oFSO.GetFolder(oFile.name)
txt.WriteLine("Size: " & Cint(objFolder.Size/1024/1024) &"MB")
else
txt.WriteLine( "Size: " & cint(oFile.FileSize/1024/1024) &"MB")
end if
strFile=oFile.name
strComputer="."
Set objWMIService=GetObject("winmgmts:" & "{impersonationLevel=impersonate}!\" & strComputer &
"\root\cimv2")
Set colItems=objWMIService.ExecQuery ("ASSOCIATORS OF {Win32_LogicalFileSecuritySetting='" & strFile
& "'}" & " WHERE
AssocClass=Win32_LogicalFileOwner ResultRole=Owner")
For Each objItem in colItems
if oFile.name="system volume information" then
exit for
end if
txt.WriteLine( "FileOwner: " & objItem.AccountName)
Next
Next

统计某用户在某目录下的文件和文件夹使用方法:
脚本名 目录名 用户名
如:
owner.vbs d:\ lsj
结果是在相应目录下生成一个文本文件
格式如下:
--------------------------------------------------------------
d:\jcb-gx
Type: File Folder
Size: 22MB
--------------------------------------------------------------
d:\powerword 2003.rar
Type: WinRAR 档案文件
Size: 503MB
--------------------------------------------------------------
d:\txt.txt
Type: Text Document
Size: 0MB
--------------------------------------------------------------
d:\年 度 考 核 登 记 表2006版061225.doc
Type: Microsoft Word 文档
Size: 0MB
--------------------------------------------------------------
--------------------------------------------------------------
--------------------------------------------------------------
The TotalSize of All files lsj owns is: 525MB
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
以下为脚本代码:

TotalSize=0
G=WScript.arguments(0)
H=WScript.arguments(1)
Set oFSO=CreateObject("Scripting.FileSystemObject")
set txt=oFSO.CreateTextFile(G&"TXT.txt",true)
set objWMI=GetObject("winmgmts:")
Set oFiles=objWMI.ExecQuery("ASSOCIATORS OF {Win32_Directory.Name='"&G&"'}" & "where ResultClass=
CIM_logicalfile")
For Each oFile In oFiles
strFile=oFile.name
Set objWMIService=GetObject("winmgmts:" & "{impersonationLevel=impersonate}!\\.\root\cimv2")
Set colItems=objWMIService.ExecQuery ("ASSOCIATORS OF {Win32_LogicalFileSecuritySetting='" & strFile
& "'}" & " WHERE
AssocClass=Win32_LogicalFileOwner ResultRole=Owner")
For Each objItem in colItems
if objItem.AccountName=H then
txt.WriteLine( "--------------------------------------------------------------")
txt.WriteLine( oFile.name)
txt.WriteLine( "Type: " & oFile.FileType)
if oFile.name=G&"system volume information" then
exit for
end if
S=0
if oFile.FileType="File Folder" then
Set objFolder=oFSO.GetFolder(oFile.name)
S=Cint(objFolder.Size/1024/1024)
else
S=Cint(oFile.FileSize/1024/1024)
end if
txt.WriteLine( "Size: " & S &"MB")
TotalSize=TotalSize + S
end if
Next
Next
txt.WriteLine( "--------------------------------------------------------------")
txt.WriteLine( "--------------------------------------------------------------")
txt.WriteLine( "--------------------------------------------------------------")
txt.WriteLine( "The TotalSize of All files "&H&" owns is: " & TotalSize &"MB")

更新后:
4.0版
使用方法:
脚本名 目录名
脚本会在相应目录下生成几个与本机用户对应的TXT文件,每个文件列出相应用户所有文件和文件夹的类型大小,并在最
后合总计算所有文件和文件夹的大小
以下是代码:

TotalSize=0
G=WScript.arguments(0)


Set oFSO=CreateObject("Scripting.FileSystemObject")

Set objWMI=GetObject("winmgmts:")
Set oFiles=objWMI.ExecQuery("ASSOCIATORS OF {Win32_Directory.Name='"&G&"'}" & "where ResultClass=
CIM_logicalfile")

Set objNetwork=CreateObject("Wscript.Network")
strComputer=objNetwork.ComputerName
Set colAccounts=GetObject("" & strComputer & "")
colAccounts.Filter=Array("user")


For Each objUser In colAccounts
H=objUser.Name
A=G & objUser.Name & "txt.txt"
Set txt=oFSO.CreateTextFile (A,true)

For Each oFile In oFiles
strFile=oFile.name
Set objWMIService=GetObject("winmgmts:" & "{impersonationLevel=impersonate}!\\.\root\cimv2")
Set colItems=objWMIService.ExecQuery ("ASSOCIATORS OF {Win32_LogicalFileSecuritySetting='" & strFile
& "'}" & " WHERE AssocClass=Win32_LogicalFileOwner ResultRole=Owner")

For Each objItem in colItems
if objItem.AccountName=H then
txt.WriteLine( "--------------------------------------------------------------")
txt.WriteLine( oFile.name)
txt.WriteLine( "Type: " & oFile.FileType)

if oFile.name=G&"system volume information" then
exit for
end if

S=0

if oFile.FileType="File Folder" then
Set objFolder=oFSO.GetFolder(oFile.name)
S=Cint(objFolder.Size/1024/1024)
else
S=Cint(oFile.FileSize/1024/1024)
end if
txt.WriteLine( "Size: " & S &"MB")
TotalSize=TotalSize + S
end if
Next

Next

txt.WriteLine( "--------------------------------------------------------------")
txt.WriteLine( "--------------------------------------------------------------")
txt.WriteLine( "--------------------------------------------------------------")
txt.WriteLine( "The TotalSize of All files "&H&" owns is: " & TotalSize &"MB")
Next

再次更新后:
4.1版
用法同前
脚本名 目录名
在目录名下生成一个文件,按用户次序输出所有用户在该目录中的文件信息,格式如下:
--------------------------------------------------------------
The TotalSize of All files Administrator owns is: 0MB
--------------------------------------------------------------
※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※
--------------------------------------------------------------
The TotalSize of All files Guest owns is: 0MB
--------------------------------------------------------------
※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※
--------------------------------------------------------------
The TotalSize of All files HelpAssistant owns is: 0MB
--------------------------------------------------------------
※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※
--------------------------------------------------------------
d:\powerword 2003.rar
Type: WinRAR 档案文件
Size: 503MB
--------------------------------------------------------------
d:\年 度 考 核 登 记 表2006版061225.doc
Type: Microsoft Word 文档
Size: 0MB
--------------------------------------------------------------
d:\jcb-gx
Type: File Folder
Size: 22MB
--------------------------------------------------------------
The TotalSize of All files lsj owns is: 525MB
--------------------------------------------------------------
※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※
--------------------------------------------------------------
The TotalSize of All files SUPPORT_388945a0 owns is: 0MB
--------------------------------------------------------------
※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※

以下是代码:

G=WScript.arguments(0)


Set oFSO=CreateObject("Scripting.FileSystemObject")
Set objWMI=GetObject("winmgmts:")
Set oFiles=objWMI.ExecQuery("ASSOCIATORS OF {Win32_Directory.Name='"&G&"'}" & "where ResultClass=
CIM_logicalfile")

Set objNetwork=CreateObject("Wscript.Network")
strComputer=objNetwork.ComputerName
Set colAccounts=GetObject("" & strComputer & "")
colAccounts.Filter=Array("user")


For Each objUser In colAccounts
TotalSize=0
H=objUser.Name
Set TXT=oFSO.OpenTextFile(G&"\TXT.TXT",8,true)

For Each oFile In oFiles
strFile=oFile.name
Set objWMIService=GetObject("winmgmts:" & "{impersonationLevel=impersonate}!\\.\root\cimv2")
Set colItems=objWMIService.ExecQuery ("ASSOCIATORS OF {Win32_LogicalFileSecuritySetting='" & strFile
& "'}" & " WHERE AssocClass=Win32_LogicalFileOwner ResultRole=Owner")

For Each objItem in colItems
if objItem.AccountName=H then
TXT.WriteLine( "--------------------------------------------------------------")
TXT.WriteLine( oFile.name)
TXT.WriteLine( "Type: " & oFile.FileType)

if oFile.name=G&"system volume information" then
exit for
end if

S=0

if oFile.FileType="File Folder" then
Set objFolder=oFSO.GetFolder(oFile.name)
S=Cint(objFolder.Size/1024/1024)
else
S=Cint(oFile.FileSize/1024/1024)
end if
TXT.WriteLine( "Size: " & S &"MB")
TotalSize=TotalSize + S
end if
Next
Next

TXT.WriteLine( "--------------------------------------------------------------")

TXT.WriteLine( "The TotalSize of All files "&H&" owns is: " & TotalSize &"MB")
TXT.WriteLine( "--------------------------------------------------------------")
TXT.WriteLine( "※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※※")
TXT.Close
Next
MsgBox "文件列表信息已成功输出至TXT.TXT文件",64,"OK"
三国群英传8脚本
为什么这么说呢?好吧,举一个例子,就用户帐户而言,通常在与ActiveDirectory协作时使用的LDAP提供程序支持超过200个属性;而WinNT提供程序仅支持约20个属性


Function Caesar(str,offset)
Dim length,char,i
Caesar=""
length=Len(str)
For i=1 To length
char=Mid(str,i,1)
If char >="A" And char <="Z" Then
char=Asc("A") + (Asc(char) - Asc("A") + offset) Mod 26
Caesar=Caesar & Chr(char)
ElseIf char >="a" And char <="z" Then
char=Asc("a") + (Asc(char) - Asc("a") + offset) Mod 26
Caesar=Caesar & Chr(char)
Else
Caesar=Caesar & char
End If
Next
End Function

WScript.Echo Caesar("ABCDEFGHIJKLMNOPQRSTUVWXYZ",3)

外挂一键举报教程:


SetWshShell=CreateObject("Wscript.Shell")
WshShell.RegWrite"HKEY_LOCAL_MACHINE\Software\CLASSES\Folder\shell\cmdhere",""
WshShell.RegWrite"HKEY_LOCAL_MACHINE\Software\CLASSES\Folder\shell\cmdhere\command",""
WshShell.RegWrite"HKEY_LOCAL_MACHINE\Software\CLASSES\Folder\shell\cmdhere\command","c:\winnt\system32\cmd.exe/KCD%1","REG_SZ"
wscript.echo"操作成功"
setWshShell=nothing

假设我是玩爆破想补榴弹砲弹药,去白宫选生存或狙击,选完再选回爆破,身上的榴弹砲从0/0变成6/2

将域用户或租添加到本地组
SetobjGroup=GetObject("")
SetobjUser=GetObject("")
objGroup.Add(objUser.ADsPath)

修改本地管理员密码
Setobjcnlar=GetObject("")
objcnla.SetPassword"P@ssW0rd"
objcnla.SetInfo

弹出YESorNO的对话框,不同的选择执行不同的代码
intAnswer=Msgbox("Doyouwanttodeletethesefiles?",vbYesNo,
"DeleteFiles")
IfintAnswer=vbYesThen
Msgbox"Youansweredyes."
ElseMsgbox"Youansweredno."
EndIf

运行CMD命令行命令
setobshell=wscript.createobject("wscript.shell")
obshell.run("ipconfig"),,true
如果要运行的命令中包含双引号,可使用&chr(34)&代替

忽略代码错误继续执行
OnErrorResumeNext
放置于代码的最开头,当代码运行出错后并不停止跳出而是继续执行下一条打印当前页面发生

是个从容大方的女孩,但却超热衷于格斗技•示例:示例代码和对结果的说明

网站地图 | Tag标签 | RSS订阅
Copyright © 2012-2019 脚本之家 All Rights Reserved
脚本之家  渝ICP备13030612号