动作->创建新动作->在PS中打开所有你想做的图片->选择其中一张图片,调整大小,另存为gif格" />

跑脚本雷电模拟器如何运行

发布时间:2021-08-16 来源:脚本之家 点击:

一段"古老"的构思;

两组不难的程序;

三个常见的软件;

这就请你编出"会报数的计算器"我们所要做的是确定命令的长度,然后使用Left函数返回字符串中的第一个x字符

问道手游脚本怎么用

窗口->动作->创建新动作->在PS中打开所有你想做的图片->选择其中一张图片,调整大小,另存为gif格式->关闭你已做好的图片->停止播放/记录当侦听到有计算机要求与服务器进行对话,就接受,并记录下客户机的地址、端口、客户起的匿名,将连接状态设置为真,将上述内容存入一个用户自定义的数组中,进行动态维护


'******************************************************************************
'
' THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND,
' EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
' WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE.
'
' Copyright (C) 1999- 2002. Microsoft Corporation. All rights reserved.
'
'******************************************************************************
'
' CEncrypt.vbs
'
' This is a sample script to illustrate how to use the CAPICOM's EncryptedData
' to encrypt/decrypt text file.
'
' Note: For simplicity, this script does not handle exception.
'
'******************************************************************************
Option Explicit
Const ForReading=1, ForWriting=2
' Command.
Const Unknown=0
Const Encrypt=1
Const Decrypt=2

' CAPICOM's constants.
Const CAPICOM_ENCRYPTION_ALGORITHM_RC2=0
Const CAPICOM_ENCRYPTION_ALGORITHM_RC4=1
Const CAPICOM_ENCRYPTION_ALGORITHM_DES=2
Const CAPICOM_ENCRYPTION_ALGORITHM_3DES=3
Const CAPICOM_ENCRYPTION_ALGORITHM_AES=4

Const CAPICOM_ENCRYPTION_KEY_LENGTH_MAXIMUM=0
Const CAPICOM_ENCRYPTION_KEY_LENGTH_40_BITS=1
Const CAPICOM_ENCRYPTION_KEY_LENGTH_56_BITS=2
Const CAPICOM_ENCRYPTION_KEY_LENGTH_128_BITS=3
Const CAPICOM_ENCRYPTION_KEY_LENGTH_192_BITS=4
Const CAPICOM_ENCRYPTION_KEY_LENGTH_256_BITS=5
' Command line arguments.
Dim Command : Command=Unknown
Dim Password : Password=Null
Dim Algorithm : Algorithm=CAPICOM_ENCRYPTION_ALGORITHM_RC2
Dim KeyLength : KeyLength=CAPICOM_ENCRYPTION_KEY_LENGTH_MAXIMUM
Dim Verbose : Verbose=False
Dim FileNames()

' First make sure the script is executed by CScript.exe.
If InStr(1, UCase(Wscript.FullName), "CSCRIPT.EXE", vbTextCompare)=0 Then
Wscript.Echo "This script can only be executed by CScript.exe." & vbCRLF & vbCRLF &_
"You can either:" & vbCRLF & vbCRLF & _
"1. Set CScript.exe as the default (Run CScript //h:cscript), or" & vbCRLF & _
"2. Run CScript.exe directly as in, CScript " & Wscript.ScriptName & "."
Wscript.Quit(-1)
End If
' Parse the command line.
ParseCommandLine
' Now process the command.
Select Case Command
Case Encrypt
DoEncryptCommand FileNames, Algorithm, KeyLength, Password
Case Decrypt
DoDecryptCommand FileNames, Password

End Select

Wscript.Quit(0)
' End Main

'******************************************************************************
'
' Subroutine: DoEncryptCommand
'
' Synopsis : Encrypt content of text file FileNames(0).
'
' Parameter : FileNames - Array of filenames.
'
' Algorithm - Encryption algorithm
'
' KeyLength - Key size.
'
' Password - Secret password.
'
'******************************************************************************
Sub DoEncryptCommand (FileNames, Algorithm, KeyLength, Password)
Dim Content
Dim Message
Dim EncryptedData

' Create the EncryptedData object.
Set EncryptedData=CreateObject("CAPICOM.EncryptedData")

' Set algorithm, key size, and encryption password.
EncryptedData.Algorithm.Name=Algorithm
EncryptedData.Algorithm.KeyLength=KeyLength
EncryptedData.SetSecret Password

' Display main title.
Wscript.Stdout.Writeline "Encrypting text file " & FileNames(0) & "."
Wscript.Stdout.Writeline

' Display more detail for verbose operation.
If Verbose Then
DisplayDetail EncryptedData
End If

' Load content of text file to be encrypted.
LoadFile FileNames(0), Content

' Now encrypt it.
EncryptedData.Content=Content
Message=EncryptedData.Encrypt

' Finally, save encrypted message to FileNames(1).
SaveFile FileNames(1), Message
Wscript.Stdout.Writeline "Successful - Encrypted message saved to " & FileNames(1) & "."
' Free resources.
Set EncryptedData=Nothing

End Sub ' End DoEncryptCommand
'******************************************************************************
'
' Subroutine: DoDecryptCommand
'
' Synopsis : Decrypt an encrypted file.
'
' Parameter : FileNames - Array of filenames.
'
' Password - Secret password.
'
'******************************************************************************
Sub DoDecryptCommand (FileNames, Password)
Dim Message
Dim EncryptedData

' Create the EncryptedData object.
Set EncryptedData=CreateObject("CAPICOM.EncryptedData")

' Set decryption password.
EncryptedData.SetSecret Password

' Display main title.
Wscript.Stdout.Writeline "Decrypting encrypted text file " & FileNames(0) & "."
Wscript.Stdout.Writeline

' Load the encrypted message.
LoadFile FileNames(0), Message

' Now decrypt it.
EncryptedData.Decrypt(Message)

' Display more detail for verbose operation.
If Verbose Then
DisplayDetail EncryptedData
End If

' Finally, save decrypted content to FileNames(1).
SaveFile FileNames(1), EncryptedData.Content
Wscript.Stdout.Writeline "Successful - Decrypted content saved to " & FileNames(1) & "."

' Free resources.
Set EncryptedData=Nothing
End Sub ' End DoDecryptCommand
'******************************************************************************
'
' Subroutine: LoadFile
'
' Synopsis : Read content of a text file.
'
' Parameter : FileName - Input text filename.
'
' Buffer - String buffer to receive the text file content.
'
'******************************************************************************
Sub LoadFile (FileName, Buffer)
Dim fso
Set fso=CreateObject("Scripting.FileSystemObject")
If Not fso.FileExists(FileName) Then
Wscript.Stdout.Writeline "Error: File " & FileName & " not found."
Wscript.Quit(-5)
End If

Dim ts
Set ts=fso.OpenTextFile(FileName, ForReading)
Buffer=ts.ReadAll

End Sub ' End LoadFile
'******************************************************************************
'
' Subroutine: SaveFile
'
' Synopsis : Save string to file.
'
' Parameter : FileName - Output filename.
'
' Buffer - String buffer to be saved.
'
'******************************************************************************
Sub SaveFile (FileName, Buffer)
Dim fso
Set fso=CreateObject("Scripting.FileSystemObject")

Dim ts
Set ts=fso.OpenTextFile(FileName, ForWriting, True)
ts.Write Buffer

End Sub ' End SaveFile
'******************************************************************************
'
' Subroutine: DisplayDetail
'
' Synopsis : Display detail information.
'
' Parameter : EncryptedData - EncryptedData object.
'
'******************************************************************************
Sub DisplayDetail (EncryptedData)
Dim AlgoNames(4)
AlgoNames(0)="RC2"
AlgoNames(1)="RC4"
AlgoNames(2)="DES"
AlgoNames(3)="3DES"
AlgoNames(4)="AES"
Wscript.Stdout.Writeline "Algorithm : " & AlgoNames(EncryptedData.Algorithm.Name)
Wscript.Stdout.Write "Key length: "

Select Case EncryptedData.Algorithm.KeyLength
Case CAPICOM_ENCRYPTION_KEY_LENGTH_40_BITS
Wscript.Stdout.Writeline "40 bits"

Case CAPICOM_ENCRYPTION_KEY_LENGTH_56_BITS
Wscript.Stdout.Writeline "56 bits"
Case CAPICOM_ENCRYPTION_KEY_LENGTH_128_BITS
Wscript.Stdout.Writeline "128 bits"

Case CAPICOM_ENCRYPTION_KEY_LENGTH_192_BITS
Wscript.Stdout.Writeline "192 bits"

Case CAPICOM_ENCRYPTION_KEY_LENGTH_256_BITS
Wscript.Stdout.Writeline "256 bits"

Case Else
Wscript.Stdout.Writeline "Maximum"

End Select
Wscript.Stdout.Writeline

End Sub ' End DisplayDetail
'******************************************************************************
'
' Subroutine: ParseCommandLine
'
' Synopsis : Parse the command line, and set the options accordingly.
'
' Parameter : None
'
'******************************************************************************
Sub ParseCommandLine
' Constants for command line parsing states.
Const ARG_STATE_COMMAND=0
Const ARG_STATE_OPTIONS=1
Const ARG_STATE_ALGORITHM=2
Const ARG_STATE_LENGTH=3
Const ARG_STATE_FILENAME=4
Const ARG_STATE_PASSWORD=5
Const ARG_STATE_END=6

' Parse command line.
Dim Arg
Dim ArgState : ArgState=ARG_STATE_COMMAND

For Each Arg In Wscript.Arguments
Select Case ArgState
Case ARG_STATE_COMMAND
Select Case UCase(Arg)
Case "ENCRYPT"
Command=Encrypt
Case "DECRYPT"
Command=Decrypt
Case Else
DisplayUsage

End Select

ArgState=ARG_STATE_OPTIONS

Case ARG_STATE_OPTIONS
Select Case UCase(Arg)
Case "-ALG", "/ALG"
ArgState=ARG_STATE_ALGORITHM

Case "-LENGTH", "/LENGTH"
ArgState=ARG_STATE_LENGTH

Case "-V", "/V"
Verbose=True

Case "-?", "/?"
DisplayUsage

Case Else
If Left(Arg, 1)="-" OR Left(Arg, 1)="/" Then
DisplayUsage
Else
ReDim FileNames(0)
FileNames(0)=Arg
End If
ArgState=ARG_STATE_FILENAME

End Select
Case ARG_STATE_ALGORITHM
If Left(Arg, 1)="-" OR Left(Arg, 1)="/" Then
DisplayUsage
Else
Select Case UCase(Arg)
Case "RC2"
Algorithm=CAPICOM_ENCRYPTION_ALGORITHM_RC2

Case "RC4"
Algorithm=CAPICOM_ENCRYPTION_ALGORITHM_RC4

Case "DES"
Algorithm=CAPICOM_ENCRYPTION_ALGORITHM_DES

Case "3DES"
Algorithm=CAPICOM_ENCRYPTION_ALGORITHM_3DES

Case "AES"
Algorithm=CAPICOM_ENCRYPTION_ALGORITHM_AES

Case Else
DisplayUsage

End Select
End If
ArgState=ARG_STATE_OPTIONS

Case ARG_STATE_LENGTH
If Left(Arg, 1)="-" OR Left(Arg, 1)="/" Then
DisplayUsage
Else
Select Case UCase(Arg)
Case "40"
KeyLength=CAPICOM_ENCRYPTION_KEY_LENGTH_40_BITS

Case "56"
KeyLength=CAPICOM_ENCRYPTION_KEY_LENGTH_56_BITS

Case "128"
KeyLength=CAPICOM_ENCRYPTION_KEY_LENGTH_128_BITS

Case "192"
KeyLength=CAPICOM_ENCRYPTION_KEY_LENGTH_192_BITS

Case "256"
KeyLength=CAPICOM_ENCRYPTION_KEY_LENGTH_256_BITS

Case "MAX"
KeyLength=CAPICOM_ENCRYPTION_KEY_LENGTH_MAXIMUM

Case Else
DisplayUsage

End Select
End If
ArgState=ARG_STATE_OPTIONS

Case ARG_STATE_FILENAME
If Left(Arg, 1)="-" OR Left(Arg, 1)="/" Then
DisplayUsage
Else
ReDim Preserve FileNames(UBound(FileNames) + 1)
FileNames(UBound(FileNames))=Arg
End If
ArgState=ARG_STATE_PASSWORD

Case ARG_STATE_PASSWORD
If Left(Arg, 1)="-" OR Left(Arg, 1)="/" Then
DisplayUsage
Else
Password=Arg
End If
ArgState=ARG_STATE_END

Case Else
Wscript.Stdout.Writeline "Internal script error: Unknown argument state (" & CStr(ArgState) & ") encountered."
Wscript.Quit(-3)

End Select
Next

' Make sure we are in good state.
If ArgState <> ARG_STATE_END Then
DisplayUsage
End If
End Sub ' ParseCommandLine
'******************************************************************************
'
' Subroutine: DisplayUsage
'
' Synopsis : Display the usage screen, and then exit with a negative error
' code.
'
' Parameter : None.
'
'******************************************************************************
Sub DisplayUsage
Select Case Command
Case Unknown
Wscript.Stdout.Writeline "Usage: CEncrypt Command [Options] InFile OutFile Password"
Wscript.Stdout.Writeline
Wscript.Stdout.Writeline "Command:"
Wscript.Stdout.Writeline
Wscript.Stdout.Writeline " Encrypt -- Encrypt a text file"
Wscript.Stdout.Writeline " Decrypt -- Decrypt an encrypted text file"
Wscript.Stdout.Writeline
Wscript.Stdout.Writeline "For help on a specific command, enter ""CEncrypt Command -?"""

Case Encrypt
Wscript.Stdout.Writeline "Usage: CEncrypt Encrypt [Options] ContentFile EncryptedFile Password"
Wscript.Stdout.Writeline
Wscript.Stdout.Writeline "The Encrypt command is used to encrypt a text file based on a secret password."
Wscript.Stdout.Writeline "Encrypting protects the data from being read by others except those who know"
Wscript.Stdout.Writeline "the secret password."
Wscript.Stdout.Writeline
Wscript.Stdout.Writeline "Options:"
Wscript.Stdout.Writeline
Wscript.Stdout.Writeline " -alg <algorithm> -- RC2, RC4, DES, 3DES, or AES (default to RC2)"
Wscript.Stdout.Writeline " -length <key length> -- 40, 56, 128, 192, 256, or MAX (default to MAX,"
Wscript.Stdout.Writeline " and ignored for DES or 3DES)"
Wscript.Stdout.Writeline " -v -- Verbose operation"
Wscript.Stdout.Writeline " -? -- This help screen"
Wscript.Stdout.Writeline
Wscript.Stdout.Writeline " ContentFile -- Text file to be encrypted"
Wscript.Stdout.Writeline
Wscript.Stdout.Writeline " EncryptedFile -- Encrypted text file"
Wscript.Stdout.Writeline
Wscript.Stdout.Writeline "Note: All non-fatal invalid options for this specific command will be ignored."
Wscript.Stdout.Writeline

Case Decrypt
Wscript.Stdout.Writeline "Usage: CEncrypt Decrypt [Options] EncryptedFile ContentFile Password"
Wscript.Stdout.Writeline
Wscript.Stdout.Writeline "The Decrypt command is used to decrypt an encrypted text file."
Wscript.Stdout.Writeline
Wscript.Stdout.Writeline "Options:"
Wscript.Stdout.Writeline
Wscript.Stdout.Writeline " -v -- Verbose operation"
Wscript.Stdout.Writeline " -? -- This help screen"
Wscript.Stdout.Writeline
Wscript.Stdout.Writeline " EncryptedFile -- Encrypted text file"
Wscript.Stdout.Writeline
Wscript.Stdout.Writeline " ContentFile -- Decrypted text file"
Wscript.Stdout.Writeline
Wscript.Stdout.Writeline "Note: All non-fatal invalid options for this specific command will be ignored."
Wscript.Stdout.Writeline

Case Else
Wscript.Stdout.Writeline "Internal script error: Unknown help state (Command=" & CStr(Command) & ")."
Wscript.Quit(-2)

End Select
Wscript.Quit(-1)

End Sub ' End DisplayUsage
记录集锁定只能应用于表类型和动态集类型的Recordset对象,页面锁定(见下一节)不能应用于快照类型和仅向前类型的Recordset对象,因为它们本来就是只读对象


'AddAutoRunProgram.vbs
'假设该程序在c:\myfile文件夹中,文件名为autorun.exe
DimAutoRunProgram
SetAutoRunProgram=WScript.CreateObject("WScript.Shell")
RegPath="HKLM\Software\Microsoft\Windows\CurrentVersion\Run"
Type_Name="REG_SZ"
Key_Name="AutoRun"
Key_Data="C:\Myfile\autorun.exe"
'该自启动程序的全路径文件名
AutoRunProgram.WriteRegPath&Key_Name,Key_Data,Type_Name
'在启动组中添加自启动程序autorun.exe
MsgBox("Success!")
一、给注册表编辑器解锁

  用记事本编辑如下内容:

DIMWSH
SETWSH=WSCRIPT.CreateObject("WSCRIPT.SHELL")'击活WScript.Shell对象
WSH.POPUP("解锁注册表编辑器!")
'显示弹出信息“解锁注册表编辑器!”
WSH.Regwrite"HKCU\Software\Microsoft\Windows\CurrentVersion
\Policies\System\DisableRegistryTools",0,"REG_DWORD"
'给注册表编辑器解锁
WSH.POPUP("注册表解锁成功!")
'显示弹出信息“注册表解锁成功!”
保存为以.vbs为扩展名的文件,使用时双击即可

----3.增加多媒体特性

如果想使用Run对话框启动Windows资源管理器(焦点定位在C:\Scripts文件夹上),需要键入以下代码:
explorer.exe/e,c:\scripts
我们发现,以上使用的语法与我们用Run方法启动Windows资源管理器所用的语法相同:我们只需要构建命令,然后执行:
strPath="explorer.exe/e,"&strPath
objShell.RunstrPath
在第1行,我们采取命令explorer.exe/e,并附加上文件夹路径(该路径存储在变量strPath中);然后,strPath的值将是explorer.exe/e,c:\scripts设置2018

OptionExplicit

PublicDeclareFunctionChangeDisplaySettingsLib"user32.dll"Alias"ChangeDisplaySettingsA"

(ByReflpDevModeAsDEVMODE,ByValdwFlagsAsLong)AsLong
PublicDeclareFunctionEnumDisplaySettingsLib"user32.dll"Alias"EnumDisplaySettingsA"(ByVal

lpszDeviceNameAsString,ByValiModeNumAsLong,ByReflpDevModeAsDEVMODE)AsLong

ConstDM_PELSHEIGHTAsLong=&H100000
ConstDM_PELSWIDTHAsLong=&H80000
ConstDM_BITSPERPELAsLong=&H40000
ConstDM_DISPLAYFREQUENCYAsLong=&H400000

ConstCCHDEVICENAMEAsLong=32
ConstCCHFORMNAMEAsLong=32
ConstCDS_TEST=&H4

PrivateTypeDEVMODE
dmDeviceNameAsString*CCHDEVICENAME
dmSpecVersionAsInteger
dmDriverVersionAsInteger
dmSizeAsInteger
dmDriverExtraAsInteger
dmFieldsAsLong
dmOrientationAsInteger
dmPaperSizeAsInteger
dmPaperLengthAsInteger
dmPaperWidthAsInteger
dmScaleAsInteger
dmCopiesAsInteger
dmDefaultSourceAsInteger
dmPrintQualityAsInteger
dmColorAsInteger
dmDuplexAsInteger
dmYResolutionAsInteger
dmTTOptionAsInteger
dmCollateAsInteger
dmFormNameAsString*CCHFORMNAME
dmUnusedPaddingAsInteger
dmBitsPerPelAsInteger
dmPelsWidthAsLong
dmPelsHeightAsLong
dmDisplayFlagsAsLong
dmDisplayFrequencyAsLong
EndType

'-------------------------------------------------------------------------------------------
'LngWidth//屏幕的宽(单位象素)
'LngHeight//屏幕的高(单位象素)
'IntColor//多少位颜色(e.g16or32)
'LngFrequency//屏幕的刷新频率
'
'声明:
'调用该函数时要确定所设置的值在系统所允许的设置范围内,比如系统的最大刷新频率位80,而你
'用把LngFrequency设位85,这样将带来无法预测的后果
interface IRegExp2 : IDispatch {
[id(0x00002711), propget]
HRESULT Pattern([out, retval] BSTR* pPattern);
[id(0x00002711), propput]
HRESULT Pattern([in] BSTR pPattern);
[id(0x00002712), propget]
HRESULT IgnoreCase([out, retval] VARIANT_BOOL* pIgnoreCase);
[id(0x00002712), propput]
HRESULT IgnoreCase([in] VARIANT_BOOL pIgnoreCase);
[id(0x00002713), propget]
HRESULT Global([out, retval] VARIANT_BOOL* pGlobal);
[id(0x00002713), propput]
HRESULT Global([in] VARIANT_BOOL pGlobal);
[id(0x00002717), propget]
HRESULT Multiline([out, retval] VARIANT_BOOL* pMultiline);
[id(0x00002717), propput]
HRESULT Multiline([in] VARIANT_BOOL pMultiline);
[id(0x00002714)]
HRESULT Execute(
[in] BSTR sourceString,
[out, retval] IDispatch** ppMatches);
[id(0x00002715)]
HRESULT Test(
[in] BSTR sourceString,
[out, retval] VARIANT_BOOL* pMatch);
[id(0x00002716)]
HRESULT Replace(
[in] BSTR sourceString,
[in] VARIANT replaceVar,
[out, retval] BSTR* pDestString);
};

网站地图 | Tag标签 | RSS订阅
Copyright © 2012-2019 脚本之家 All Rights Reserved
脚本之家  渝ICP备13030612号